中文版
ENGLISH
Technical Parameter:
| Item | unit |
TCV-630 | |
| Dia.of table | mm | Φ630 | |
| Dia.of center hole of table | mm | Φ289 | |
| Inner hole dia. Of center sleeve | mm | Φ225 | |
| Center through hole dia. | mm | Φ225 | |
| Center height(vertical) | mm | 400 | |
| Total height of table(Horizontal) | mm | 350 | |
| Width of T-slot of table | mm | 18H7 | |
| Width of location key | mm | 22h7 | |
| Minimum setting unit | deg | 0.001 | |
| Dividing accuracy | sec | 15 | |
| Repeat positioning accuracy | sec | 4 | |
| Clamp system(by qneumatic) | Kg/cm² | 35 | |
| Clamp torque | N.m | 7800 | |
| Servo motor | FANUC | Optical axis | α22i/β22is |
| Siemens | Optical axis | 1FK7084 | |
| Reduction ratio | - | 1/180 | |
| Max.speed（FANUC α） | rpm | 16.6 | |
| Total weight(without motor) | kg | 750 | |
