Technical Parameter
| Item | Unit | TCV-800 | |
| Worktable Size | mm | 800 | |
| Center height | mm | 470 | |
| Spindle hole | mm | 350H7 | |
| T slot width | mm | 18 | |
| Motor | B is22 | ||
| HG-204 | |||
| Gear ratio FANUC | / | 1: 180 | |
| Min.increment MITSUBISHI | deg | 0.001° | |
| Guide block width | mm | 18H7 | |
| Output torque af brake | Kg/m | 800 | |
| Indexing accuracy | sec | 15 | |
| Repeatability | sec | 4 | |
| Allowable work kg weighf with tailsfock | 800(1500) | ||
| Allowable work weight (Horizontal work kg) | 1500 | ||
Allowable load when table clamped | kgf | 5000 | |
| FXL kgf.m | 1000 | ||
| FXL kgf.m | 800 | ||
| Total weight (No Motors) | kg | 996 | |
