◆Rotary table is one of the most important accessary of milling machine. lt is widely used for indexboring,miligcircle cutting.circle curve plane and segment etc oper-ation.
◆As a option,different table supply differentflange,flange will be packed separately, other-wise,dividing plates which provides from theoption can indexing all of the integer between 2and 66 also can indexing the numbers between67 and 132 can be divided exactly by numbr2、3 and 5.
Technical Parameter
| Speifications tems | TS150A | TS200A | TS250A | TS320A | TS400A |
| Table diaeter mm | Φ150 | Φ200 | Φ250 | Φ320 | Φ400 |
| Morse taper of the center hole | 2# | 3# | 4# | ||
| Width of the T-solt mm | 14 | 14 | 14 | 16 | |
| Adjacont angle of table T-slot | 90 | 60 | |||
| Width of the locating key mm | 16 | 16 | 14 | 14 | 18 |
| Graduation of the table | 360 | 360 | 360 | 360 | 360 |
| Minimun value of vermier | 10 | 10 | 10 | 10 | 10 |
| Indexing accuracy | 80 | 60 | 60 | 60 | 60 |
| Max. workload kg | 50 | 100 | 150 | 200 | 250 |
| Not weight kg | 16.5 | 22.5 | 33.5 | 65 | 125 |
| Gross weight ka | 21.5 | 31 | 44.5 | 76 | 145 |
| Overall dimensions mm | 294x243x130 | 400x360x208 | 500x400x210 | 580x480x238 | 750x616x280 |
| TS500A | TS630A | TS800A | TS1000A | TS1250 | TS1600 |
| Φ500 | Φ630 | Φ800 | Φ1000 | Φ1250 | Φ1600 |
| 5# | 6# | 6# | 6# | ||
| 18 | 22 | 22 | 22 | ||
| 45 | 45 | 45 | |||
| 18 | 18 | 18 | 18 | 22 | 22 |
| 360 | 360 | 360 | 360 | 360 | 360 |
| 10 | 10 | 10 | 10 | 10 | 10 |
| 60 | 60 | 60 | 60 | 60 | 60 |
| 300 | 700 | 1200 | 2000 | 3000 | 8000 |
| 215 | 345 | 800 | 1300 | 1580 | 2500 |
| 238 | 377 | 855 | 1400 | 1700 | 2700 |
| 850x730x302 | 995x900x326 | 1175x 1090x391 | 430x1224550 | 450x1450450 | 178x178x50 |
| Model | TS160A | TS200A | TS250A | TS320A | TS400A |
| A | 213 | 280 | 330 | 420 | 500 |
| B | 186 | 238 | 286 | 360 | 450 |
| C | 260 | 390 | 422 | 480 | 640 |
| D | Φ150 | Φ200 | Φ250 | Φ320 | Φ400 |
| G | 16 | 16 | 14 | 14 | 18 |
| H | 86 | 105 | 97 | 125 | 140 |
| J | 12 | 14 | 18 | ||
| K | 54 | 85 | 102.5 | 128.5 | 135 |
| L | 165 | 211 | 230 | 240 | 345 |
| M | Mt2 | MT3 | MT4 | ||
| P | 27 | 30 | 30.5 | 44 | 50 |
| Q | 85 | 115 | 140 | ||
| d | Φ17 | Φ23 | Φ31 | ||
| h | 6 | 6 | |||
| TS500A | TS630A | TS800A | TS1000A | TS1250A | TS1600A |
| 610 | 920 | 1000 | 1170 | 1400 | 1700 |
| 560 | 700 | 890 | 1080 | 1300 | 1664 |
| 680 | 898 | 1090 | 1295 | 1450 | 1731 |
| Φ500 | Φ630 | Φ900 | Φ1000 | 1250 | 1600 |
| 22 | 22 | 22 | 22 | ||
| 140 | 160 | 215 | 250 | 290 | 320 |
| 22 | 30 | 30 | 30 | ||
| 180 | 295 | 364 | 364 | 530 | 666 |
| 383 | 488 | 535 | 654 | 6900 | 891 |
| MT5 | MT6 | MT6 | MT6 | ||
| 65 | 60 | 78 | 108 | 108 | 108 |
| 140 | 220 | 250 | 250 | 250 | |
| Φ50 | Φ50 | Φ55 | Φ55 | ||
| 12 | 14 | 14 | 14 | ||
