◆ Tilting rotary tables are one of main accessories for milling,boring an drilling machines.They can beused for
machining,the oblique hole or surface and hole of compound angle at one set-up.Besides this,it is sodesigned as to be used in a vertical position to carry out center work with a tailstock.
◆This table can be tilted to any position from 0~t0 90~ and locked.
◆A flange for connecting scroll chuck is special supplied,and be packed independent.For specialorder,the dividing plates acces -sory allows the operator to accurately divide the 360- rotation of theclamping surface into divisions of 2 through 66,and all divisible of 2,3 and 5 from 67-132.
Technical Parameter
| Specifications ltems | TSK3" | TSK4" | TSK5" | TSK6" | TSK8" |
| Diameter of table mm | 中75 | 中110 | 中127 | 中150 | 中200 |
| Morse taper of the center hole | / | 2# | 2# | 2# | 3# |
| Width of T-siotmm | 8 | 12 | 12 | 14 | 14 |
| Modules of worm and worm gear | 1 | 1 | 1 | 1 | 1.5 |
| Width of the locting key mm | 16 | 16 | 16 | 16 | 16 |
| Adjacent angle ofT-slot | 90° | 120° | 120° | 90° | 90° |
| Transmission ratio of the worm gear | 1:36 | 1:72 | 1:72 | 1:90 | 1:90 |
| Graduation of the table | 360° | 360° | 360° | 360° | 360° |
| Tilting angle | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° |
| Readout ofthe handwheel | 1 | 2 | 2 | 2 | 1" |
| Minimum value ofvernier | 20 | 20 | 20 | 20 | 10" |
| Minimum reading of the tilting vemier | 2° | 2° | 2° | 2° | 2° |
| Indexing accuracy | 80 | 60 | 60" | 60 | 60" |
| Net weight Kg | 7 | 15 | 16 | 19 | 38 |
| Gross weight Kg | 7.5 | 17 | 18 | 21 | 41 |
| Overall dimensions mm | 260x160x140 | 300x200x180 | 320x200x190 | 340x250x185 | 400x300x240 |
| TSK3" | TSK4" | TSK5" | TSK6" | TSK8" | |
| A | 95 | 142 | 145 | 180 | 230 |
| B | 115 | 175 | 190 | 215 | 280 |
| C | 130 | 150 | 150 | 160 | 200 |
| D | 75 | 110 | 127 | 150 | 200 |
| F | 65 | 85 | 115 | 125 | 160 |
| H | 72 | 65 | 85 | 65 | 100 |
| L | 120 | 130 | 140 | 125 | 170 |
| M | / | MT2 | MT2 | MT2 | MT3 |
| P | 50 | 5 | 50 | 50 | 70 |
