中文版
ENGLISH
Technical Parameter:
| project | unit |
TCVR-210 | ||
| Dia.of table | mm | Φ210 | ||
| Dia.of center hole of table | mm | Φ67 | ||
| Inner hole dia. Of center sleeve | mm | Φ40 | ||
| Center through hole dia. | mm | Φ40 | ||
| Height of table(Horizontal) | mm | 270 | ||
| Width of T-slot of table | mm | 12H7 | ||
| Width of location key | mm | 18h7 | ||
| Specification of Axis | （±100°） | |||
| Minimum setting unit | deg | 0.001 | 0.001 | |
| Dividing accuracy | sec | 25 | 60 | |
| Repeat positioning accuracy | sec | 8 | 8 | |
| Clamp system(by qneumatic) | Kg/cm² | 6 | 6 | |
| Clamp torque | kgf.m | 20 | 20/28 | |
| Servo motor | FANUC | Optical axis |
α4i/β8is | α8i/β12is |
| Siemens | Optical axis |
1FK7060 | 1FK7063 | |
| Reduction ratio | - | 1/90 | ||
| Max.speed（FANUC α） | rpm | 44.4 | ||
| Total weight(without motor) | kg | 153 | ||
| Permissible load inertia capacity | Kg.cm.sec² | 4.13 | ||
| Permissible workpiece load | Horizontal | kg | 75 | |
| Tiling | kg | 50 | ||
| Permissible Load（Clamp） | Horizontal | kgf | 750 | |
| Tiling | kgf.m | 28 | ||
| Permissible cutting torque | kg.m | 18 | ||
