中文版
ENGLISH
Technical Parameter:
| Item | Unit | TCVR-255 | ||
| Dia.of table | mm | Φ255 | ||
| Dia.of center hole of table | mm | Φ110 | ||
| Inner hole dia. Of center sleeve | mm | Φ80 | ||
| Height of table(Horizontal) | mm | 290 | ||
| Width of T-slot of table | mm | 4-12H7 | ||
| Width of location key | mm | 18h7 | ||
| Specification of Axis | Rotation axis | Rotation axis （±100°） |
||
| Minimum setting unit | deg | 0.001 | 0.001 | |
| Dividing accuracy | sec | 15 | 40 | |
| Repeat positioning accuracy | sec | 4 | 8 | |
| Clamp system(by qneumatic) | Kg/cm² | 35 | 35 | |
| Clamp torque | kgf.m | 70 | 140 | |
| Servo motor | FANUC | Optical axis | α8i/β12is | α8i/β12is |
| Siemens | Optical axis | 1FK7063 | 1FK7063 | |
| Reduction ratio | - | 1/120 | ||
| Max.speed（FANUC α） | rpm | 25 | ||
| Total weight(without motor) | kg | 300 | ||
| Permissible load inertia capacity | Kg.cm.sec² | 8.13 | ||
| Permissible workpiece load | Horizontal | kg | 100 | |
| Tiling | kg | 75 | ||
| Permissible Load（Clamp） | Horizontal | kgf | 1500 | |
| Tiling | kgf.m | 140 | ||
| Permissible cutting torque | kg.m | 55 | ||
